GembaDocs

INST: UNI-UPRS-100-PC

Step 1 - Upper Shelf Install for 100 Series

Description

How to install the Upper Shelf on the 100 Series.

Install Video: https://www.youtube.com/watch?v=s_P0f6LAg4Q (Reference)

Questions or Support:
Phone: 269-353-1184
Email: info@victory4x4.com

Step 2 - Mounting the Brackets

Description

Start by installing the mounts onto the handles on the ceiling of the cargo area. To do so you will need to first take them off. To do this, find the seams on either side of each handle and pop the outer covers off. It may be helpful to use something like a plastic pry tool but can be done by hand. Then simply take out the factory bolts. Then, pop the handles into the square cutouts in the mounting brackets and reinstall them using the provided 35 mm M6 button head bolts. In most models, the mounts are the same on both sides and the top of the mounts should angle down while the lip with the numbers on it should point in towards the middle of the vehicle. In 1998-2001 models, you will have to use the other provided bracket on the driver’s side and make sure that the top of the mount points up rather than down.

Step 3 - Front Panel Attachment

Description

Next, attach the front panel to the basket using three 1/4”-20 X 3/4” button head bolts, 1/4” washers and 1/4”-20 serr. Flange nuts.

Step 4 - Install the Basket

Description

Finally, set the basket on the lip of the two mounts and attach them together using two 1/4”-20 X 3/4” button head bolts, 1/4” washers and 1/4”-20 serr. Flange nuts per side.

Step 5 - Final Check

Description

Double Check to make sure everything is fully tightened.

Install Complete, Enjoy!

of 5

HELP CENTER