To mark holes, hold molle panel ~1/4" above the panel seam on each side of the center console (as shown).
Press a pick or screwdriver through 4 holes per panel to mark drilling spots on the plastic.
Using a 1/16" drill bit, drill JUST through the plastic on your 4 marks.
Warning: drilling too deep may cause damage to the components hidden behind the plastic.
Install the panel to your drilled holes as shown. Be sure to place the spacers between the panel and the console.
WARNING: Do not overtighten the screws. We recommend using a regular P2 screwdriver to install - not a power drill. These screws need to be snug, not tight.
Repeat on other side of console. Note: The panel on the passenger side should be lined up with the curve on the console, and will sit ~1" further from the dash than the driver side.
HELP CENTER
Articles & Guides
GembaDocs Onboarding SOPs
15 Min - SOPs, Guide
New: How to Create, Assign and Track Training Courses
6 Min - Guide
Learn GembaDocs
2 Min - Guides and Video
SOP vs Advanced SOP Guide
10 Min - Guides and Video
Explore
Support Hub
Lean Cave
GembaTalk
More Resources
Bugs & Improvements
Suggest an improvement, or report a bug, direct from the app/platform.
API Documentation
Connect GembaDocs with external systems