Step by step on how to install the XJ Interior MOLLE Panel. Please read all steps carefully before starting the install.
Questions or Support:
Phone: 269-353-1184
Email: info@jcroffroad.com
Check that you have the MOLLE panel shown before starting.
Check that you have all of the hardware shown before starting (hardware pack 046-0044).
This panel fits the Cherokee XJ and Ford Maverick center console. Hold the panel against the top or back face of the console and center it. Mark the 4 corner hole locations with a marker or awl.
Remove the panel. Thread one of the provided screws into each of the 4 marked spots to start the holes, then back them out. Do not push the screws too far through the plastic.
Set a spacer behind each corner hole, line the panel back up with the started holes and thread the 4 screws in with a screwdriver until snug.
Do not over tighten the screws, as this can strip the plastic. Congrats! Your installation of the XJ Interior MOLLE Panel is now complete. Enjoy!
HELP CENTER
Articles & Guides
GembaDocs Onboarding SOPs
15 Min - SOPs, Guide
New: How to Create, Assign and Track Training Courses
6 Min - Guide
Learn GembaDocs
2 Min - Guides and Video
SOP vs Advanced SOP Guide
10 Min - Guides and Video
Explore
Support Hub
Lean Cave
GembaTalk
More Resources
Bugs & Improvements
Suggest an improvement, or report a bug, direct from the app/platform.
API Documentation
Connect GembaDocs with external systems