Step by step on how to install the Unibody Tie-In Kit with Steering Spacer on the 1984-2001 Jeep Cherokee XJ.
Installation Video: https://www.youtube.com/watch?v=ysq0RJDetZ4
Questions or Support:
Phone: 269-353-1184
Email: info@jcroffroad.com
Double check you have all the correct hardware as shown in the image before starting.
Check that you have all of the parts shown before starting.
Identify your hardware using the numbers in the picture. Remove or trim the fender angle support so the front brackets fit. It is held in by four 10mm bolts, and many people remove it entirely.
Remove the three factory steering box bolts on the driver side. If they fight you, apply heat to the bolt threads at the steering box, or soak with penetrating oil for a few days.
Place the tie-in bracket against the frame and loosely install the long 1/2" bolts (#5) in the rearmost hole. Use blue Loctite on the replacement steering box bolts (#4), reinstall the steering box, and leave all bolts slightly loose.
That’s it! Once everything is lined up, tighten all of your bolts and enjoy your new Unibody Tie-In Kit!
Congratulations, you have completed the install of your new XJ Unibody Tie-In Kit! Enjoy your new product.
Questions or Support:
Phone: 269-353-1184
Email: info@jcroffroad.com
HELP CENTER
Articles & Guides
GembaDocs Onboarding SOPs
15 Min - SOPs, Guide
New: How to Create, Assign and Track Training Courses
6 Min - Guide
Learn GembaDocs
2 Min - Guides and Video
SOP vs Advanced SOP Guide
10 Min - Guides and Video
Explore
Support Hub
Lean Cave
GembaTalk
More Resources
Bugs & Improvements
Suggest an improvement, or report a bug, direct from the app/platform.
API Documentation
Connect GembaDocs with external systems