Step by step on how to install the Gladiator Underseat Storage Basket. Please read all steps carefully before starting the install.
Installation Video: https://www.youtube.com/watch?v=C1WOYQR2FJc
Questions or Support:
Phone: 269-353-1184
Email: info@jcroffroad.com
Check that you have all of the parts shown before starting.
Check that you have all of the hardware shown before starting.
Attach the lock to the front panel of the basket. Insert it through the hole, right side up, and thread the nut onto the other side to secure it.
Video timestamp: 0:15
Attach the small bracket that goes behind the lock with two 1/4-20 x 3/4 in bolts, 1/4 in washers and 1/4-20 serrated flange nuts.
Video timestamp: 0:53
Mount both side panels to the sides of the front panel with three 1/4-20 x 3/4 in bolts, 1/4 in washers and serrated flange nuts per side. Leave the bolts a little loose to make attaching the bottom panel easier.
Video timestamp: 1:27
Attach the bottom panel with 1/4-20 x 3/4 in bolts, 1/4 in washers and serrated flange nuts. Once all bolts are started, go back and tighten them all, and tighten the side panels fully at the same time.
Video timestamp: 1:43
Decide whether to use the divider. It can go in any of the long thin slots on the bottom panel. Slip its bottom tabs into the slots, then attach it to the front panel with two 1/4-20 x 3/4 in bolts, 1/4 in washers and serrated flange nuts.
Video timestamp: 1:58
Place the basket in the Gladiator, lining the factory holes up with the mounting slots in the basket, and mount it with the factory hardware. Leave it a little loose to make mounting the latches easier.
Video timestamp: 8:28
Mount the latch brackets to the bottom of the seats. The install video on the product page shows how.
Video timestamp: 8:59
Confirm all hardware is tightened. Congrats! Your installation of the Gladiator Underseat Storage Basket is now complete. Enjoy!
15 Min - SOPs, Guide
6 Min - Guide
2 Min - Guides and Video
10 Min - Guides and Video
Suggest an improvement, or report a bug, direct from the app/platform.
Connect GembaDocs with external systems
