Included Parts: (1x) Center Panel | (L&R) Side Panel | (2x) Mounting Bracket
Included Hardware: (24x) 1/4"-20 x 1/2" Button Head Bolt | (24x) 1/4"-20 Serr. Flange Nut | (24x) 1/4" washers
Begin by loosely connecting the three panels together as shown using the 1/4" hardware in the center of the panels
Install the 1/4" hardware into the top and bottom holes of the panels as show. With all hardware loosely in place, tighten the panels together completely.
Inside the vehicle, mount the brackets to the molle panels as shown, again using the 1/4" hardware. Tighten the bolts most of the way to hold it in place but keep in mind the bracket may need to be adjusted later. Repeat on the other side.
Loosely mount the pet divider to the brackets as shown, again using the 1/4" hardware.
With the pet divider loosely installed, adjust the fitment as necessary and then tighten all hardware into fully. With that, the install is complete.
HELP CENTER
Articles & Guides
GembaDocs Onboarding SOPs
15 Min - SOPs, Guide
New: How to Create, Assign and Track Training Courses
6 Min - Guide
Learn GembaDocs
2 Min - Guides and Video
SOP vs Advanced SOP Guide
10 Min - Guides and Video
Explore
Support Hub
Lean Cave
GembaTalk
More Resources
Bugs & Improvements
Suggest an improvement, or report a bug, direct from the app/platform.
API Documentation
Connect GembaDocs with external systems