Step by step on how to install the Hood Antenna Mount on the 3rd Gen Tacoma.
Installation Video: https://www.youtube.com/watch?v=V-4PdrMDJRc
Questions or Support:
Phone: 269-353-1184
Email: info@victory4x4.com
Check that you have all of the parts and hardware shown before starting.
Remove the hood bolts on the passenger side. Hold the corner of the hood so it cannot fall into the windshield, and mark where the bracket goes with a sharpie.
Use a 12mm socket to remove the two hood bolts so the bracket can be installed.
Line the bracket up with the hinge. Make sure the hinge lines up with the marks you made with the sharpie.
Using a 12mm socket, reinstall the two factory bolts to secure the bracket to the hood.
Push up on the bottom of the bracket to push the threads through the hole. Install the small rubber washer with the brass nut on top.
Tighten the brass nut with channel locks, but do not overtighten. You are now finished with the install!
Congratulations, you have completed the install of your new Tacoma Hood Antenna Mount! Enjoy your new product.
Questions or Support:
Phone: 269-353-1184
Email: info@victory4x4.com
HELP CENTER
Articles & Guides
GembaDocs Onboarding SOPs
15 Min - SOPs, Guide
New: How to Create, Assign and Track Training Courses
6 Min - Guide
Learn GembaDocs
2 Min - Guides and Video
SOP vs Advanced SOP Guide
10 Min - Guides and Video
Explore
Support Hub
Lean Cave
GembaTalk
More Resources
Bugs & Improvements
Suggest an improvement, or report a bug, direct from the app/platform.
API Documentation
Connect GembaDocs with external systems