Provided Hardware & Tools Needed:
(8) 5/16" Hex Bolts
(8) 1/2" Washers
(8) 5/16" Nut Tabs
1/2" Wrench
Included Parts:
(2) Shock Skids
The (2) holes shown are the holes you will need to line your skid holes up to on each side of the shock, making (4) total.
Take the provided hardware and insert it through the skid into the holes stated in the previous step on each side of the skid. There is a slot in the skid to adjust height.
Once all (4) of your bolts are started into the nut tabs and the height is adjusted, use a 1/2" wrench and tighten them all down to finish your install.
HELP CENTER
Articles & Guides
GembaDocs Onboarding SOPs
15 Min - SOPs, Guide
New: How to Create, Assign and Track Training Courses
6 Min - Guide
Learn GembaDocs
2 Min - Guides and Video
SOP vs Advanced SOP Guide
10 Min - Guides and Video
Explore
Support Hub
Lean Cave
GembaTalk
More Resources
Bugs & Improvements
Suggest an improvement, or report a bug, direct from the app/platform.
API Documentation
Connect GembaDocs with external systems