Note: The MOLLE panel design in some pictures has since been updated. The mounting locations have not changed.
Step by step on how to install the Gladiator Bed Side MOLLE Panel. Please read all steps carefully before starting the install. Installation Video: https://www.youtube.com/watch?v=WmVDZDsNnSs Questions or Support: Phone: 269-353-1184 Email: info@jcroffroad.com
Check that you have all of the parts shown before starting.
Check that you have all of the hardware shown before starting.
Attach the two MOLLE panels together with two 5/16-18 x 3/4 in bolts and serrated flange nuts. Either panel can go on top. Flip the front panel so the JCR logo reads correctly for whichever side of the bed you are installing on.
Video timestamp: 0:15
Cut the edge trim into two smaller pieces to fit the bottom edge of the wider bracket and put them on. Bolt both brackets to the inside of the panel in the positions shown, with 5/16-18 x 3/4 in bolts and serrated flange nuts. The bottom edge of the brackets points toward the side of the bed.
Video timestamp: 0:30
Mount the three other brackets to the side of the bed. With a Trail Rail, remove it and mount the brackets between the Trail Rail and the bed using the same holes and factory hardware. Without one, bolt the brackets into the Trail Rail holes with the M6 x 25mm bolts and 1/4 in washers. Leave the bolts somewhat loose for now.
Video timestamp: 2:11
With the brackets in place, mount the MOLLE panel to them with 5/16-18 x 3/4 in bolts and serrated flange nuts. The slots in the brackets line up with the slots in the top of the panels. Then tighten everything.
Video timestamp: 6:31
Confirm all hardware is tightened. Congrats! Your installation of the Gladiator Bed Side MOLLE Panel is now complete. Enjoy!
HELP CENTER
Articles & Guides
GembaDocs Onboarding SOPs
15 Min - SOPs, Guide
New: How to Create, Assign and Track Training Courses
6 Min - Guide
Learn GembaDocs
2 Min - Guides and Video
SOP vs Advanced SOP Guide
10 Min - Guides and Video
Explore
Support Hub
Lean Cave
GembaTalk
More Resources
Bugs & Improvements
Suggest an improvement, or report a bug, direct from the app/platform.
API Documentation
Connect GembaDocs with external systems