Installing the JcrOffroad Front Lower Bumper Skid (VCM) | Jeep Wrangler JK (2007-2018) JKSD-VCM Youtube https://www.youtube.com/watch?v=9kNok_e5GF8
Check your Jeep's model year; If your Jeep is a 2011 or older model, you'll need to cut the ends off the crash bar before proceeding. 2012-2014 models skip this step but have an extra step later on.
Drop bolts through the mounting tabs; Drop the 5/16" bolts down through the bumper mounting tabs.
Slide the skid plate onto the bolts.
Loosely install the flange nuts; do not tighten yet.
2012-2014 models: fish the flange nuts into the crash bar; On these model years, you'll need to fish the flange nuts into the crash bar as shown in the video, since the bolt access is different than on older models.
Drill a hole on the passenger side; On the passenger side, drill a 5/16" hole into the bottom of the crash bar to allow the lower bolt to pass through.
Thread on the lower bolts and tighten everything; Thread the lower bolts through the new hole, then go back and tighten all the bolts and flange nuts on both sides to finish the install.
Just like that, the Front Lower Bumper Skid (VCM) | Jeep Wrangler JK (2007-2018) install is completed. Questions? Contact Victory 4x4: Email: info@victory4x4.com Phone: 269-459-8447
HELP CENTER
Articles & Guides
GembaDocs Onboarding SOPs
15 Min - SOPs, Guide
New: How to Create, Assign and Track Training Courses
6 Min - Guide
Learn GembaDocs
2 Min - Guides and Video
SOP vs Advanced SOP Guide
10 Min - Guides and Video
Explore
Support Hub
Lean Cave
GembaTalk
More Resources
Bugs & Improvements
Suggest an improvement, or report a bug, direct from the app/platform.
API Documentation
Connect GembaDocs with external systems